| Availability: | |
|---|---|
| Quantity: | |
Performance Data |
Power(W) | Speed(Km/h) | Runtime(min) | Range(Km) |
7350 | 24 | 69 | 27.6 |
6350 | 22 | 84 | 30.8 |
4830 | 20 | 111 | 37 |
4175 | 18 | 130 | 39 |
3765 | 15 | 160 | 42 |
2270 | 10 | 240 | 45 |
1140 | 7 | 480 | 56 |
760 | 6 | 720 | 72 |
380 | 5 | 1440 | 120 |
*The test data is based on a 4.3-meter rubber boat, an adult male and a 72V 120Ah lithium iron phosphate battery, tested in calm lake water. Actual speeds, ranges and operating times will vary depending on vessel, load, weather, etc. | |||
Product Model | E10 |
Rated Power | 10HP/7.3KW |
Rated Voltage | 72V |
Motor Type | Permanent Magnet Synchronous Motor |
Sensor Type | Magnetic Encoder |
Cooling System | Water Cooling |
Steering System | Tiller Handle/Remote Control |
Trim and Tilt System | Manual |
Idle Speed | 500-700 r/min |
Maximum Speed | 4250 r/min |
Gear Ratio | 2.08 (27/13) |
Gear Position | Forward-Neutral-Reverse |
Propeller Size (in) | 9-1/4×12 |
Shaft Length | S: 440mm (17.3 in) |
Overall L×W×H | S: 873×332×1040 mm (34.4×13.1×40.9 in) |
Net Weight | S: 37.5 kg |
Packing Size | S: 120.5×71×39.5 cm |
Optional Models | E10HS: tiller handle, short shaft |
Recommended Battery | 72V LiFePO4 Battery |
Working Current | ≤105 A |
Input Voltage Range | 63-86 V |
Cut Off Voltage | 60V |
Anderson Connector | SMH 120A-600V |
Note | ● You can also use other brands of lithium batteries, or other types of batteries, such as lead-acid batteries, AGM batteries, etc. ● Under no circumstances should a starting battery be used! ● Marine batteries may be used, but retain at least 50% power to prevent battery life from consuming too quickly. ● It is recommended to use traction batteries, which should retain at least 20-30% battery power for each use. |
Permanent Magnet Synchronous Motor (PMSM) |
This PMSM (Permanent Magnet Synchronous Motor) is designed for electric outboard motors, offering high efficiency, low heat generation, and stable torque performance. It ensures reliable marine propulsion with precise control and consistent output in both calm and rough water conditions.
Water Cooling System |
AIQIDI 10HP electric outboard motor features a water-cooling system that provides consistent heat dissipation, helping prevent overheating and maintaining stable performance during continuous marine operation.
Applicable Ship Type |
AIQIDI electric 10 horsepower outboard motor is suitable for small vessels of different materials, such as inflatable boats, wooden boats, FRP boats, plastic and so on, ranging from 3.0m to 6.0m.
